Towel Bar Mounting Height And Towel Bar Classification

Towels are something we often touch every day, and there is direct contact with our skin. So to keep the towel dry, we'll install towel poles. What is the installation height of the towel bar? What is the towel bar classification?

【 Towel bar classification 】

1 According to the towel rod manufacturing material classification

Divided from the material, the towel bar on the current sanitary ware market can be generally divided into stainless steel towel bar, aluminum alloy towel bar and copper towel bar. Towel rod as the name suggests is hanging towels, so the stainless steel towel rod is very popular, the general stainless steel towel rod is not easy to rust, and the surface of the polishing or wire drawing process, beautiful and fashionable; The copper towel bar is mainly made of brass, and the surface is generally treated with chromium plating, which represents the nobility and taste. Aluminum alloy towel rod is generally made of rust-proof aluminum group or duralumin group, and the surface is anodized.

2 According to the number of towel bars

Modern towel bars generally have a single bar and multi - bar. Single-rod towel bar refers to a towel bar consisting of one rod. Multi-rod towel bar refers to a towel bar consisting of two or more rods. There are two and three towel bars commonly seen in the market.

3 Type by towel rod length (size)

The size of the towel rod generally refers to the length of the towel rod, the current common towel rod length on the market has 50CM, 60CM, 80CM, 100CM and so on. In order to meet the needs of more consumers, the towel rod length is 120CM or above. When consumers buy the towel rod, they can choose the towel rod with the matching length according to the size of the toilet. The general principle is not only to meet their actual needs, but also to make the bathroom beautiful.

Towel bar

[Installation height of towel bar]

Towel ring distance from the ground 900-1400mm;

Towel bar from the ground height 1100-1200mm;

The single-bar towel rack is generally about 1.5 meters above the ground;

The distance between the bottom of the towel rack base and the sink table is 55 cm;

The bathtub towel rack is installed above the bathtub, generally on the opposite side of the faucet, 1600mm from the ground;

2 tips for choosing towel bar

Tip 1 .Weigh

Heavier is not always better

When it comes to the towel racks, Mr. Qu, the owner of Star Harmony Park, says he feels cheated. Once, when he slipped in the bathroom and accidentally broke a towel bar, he discovered that it actually contained stuffing. When he bought the towel rack, he thought it felt heavy and judged the quality of the product to be good.

No matter what kind of material the towel rack is made of, its rod and tube are hollow. Some bad manufacturers, in order to deceive consumers, fill the hollow towel rack rod tube with cement and other items to increase the weight of the product. The added weight is not conducive to the stability of the towel rack, which may loosen screws or even cause the towel rack to fall off. Consumers should not be fooled by the weight of the towel rack to avoid penny-wise and pound-foolish.

Expert reminds: when choosing, you can open the seal of the towel rod and observe its internal condition. The general towel rod seal is tight. Consumers can also estimate the weight of the towel rack by weighing it in their hands. If the towel rack feels heavy, and the price is relatively cheap, consumers should pay more attention.

Tip 2. Pick accessories

Choose stainless steel fittings

Recently, the towel rack in the bathroom of the gentleman in the civic area became loose when he used it. He pulled the towel rack from the wall with his hand. The screws of the original towel rack have been oxidized and rusted, and cannot be effectively fixed in the wall, which affects the normal use of the towel rack. When choosing a towel rack, look not only at the surface, but also at details such as screws, bases and welds.

It is understood that, due to the large humidity and temperature difference in the bathroom, ordinary screws are easy to rust under such conditions. The towel rack should be made of stainless steel to achieve the purpose of moisture-proof and anti-oxidation. Copper is a common material for towel rack base, which can be divided into 59 copper (unit content of copper is 59%) and 62 copper (unit content of copper is 62%) according to different materials. If the content is lower than 59 copper, it does not meet the requirements of the national standard. Welding is also a detail that consumers are easy to ignore. Welding joints need to be polished, otherwise the protruding welding joints will not only affect the appearance, but also cause inconvenience to consumers in use.

Experts remind: when purchasing, consumers should not pay attention to the above details. They should observe whether the welding of the towel rack has been polished, and beware of the distribution of non-embroidered steel screw accessories. Brand towel racks pay more attention to the quality of small places, it is recommended to buy brand towel racks.

Under the light, tilt the towel bar to better observe the gloss of the coating on its surface.

When selecting a towel rack, open the seal of the towel rack and observe whether there is any padding inside.

The inner wall of the towel bar can be cut with scissors to identify the material. The small picture shows that the cut pieces are golden, which can be judged to be all copper material.

As for the classification of the towel rod and the installation height of the towel rod, this article will introduce it to you here. I believe that you have a comprehensive understanding of the towel rod after reading the above article. If you need to purchase the towel bar, we are the China towel bar factory.