How to install the towel rack

Speaking of the bath towel rack, everyone is familiar with it, it is one of the essential hardware pendants in the bathroom, and a good bath towel rack, not only pay attention to the color and function, but also pay attention to the installation position, so as to facilitate future use, then, the bath towel rack installed in what position? Here we will introduce in detail: where is the bath towel rack installed and how to install the bath towel rack? I hope I can give you some help and inspiration.

Where is the towel rack installed:

1, the towel rack should be set at 180 cm from the ground, the upper layer of bath towels, the lower layer of towels.

2, if the double towel rack, it should be installed on the empty wall in the central position of the bathroom, preferably 1.6 meters from the ground.

3. If it is a single towel rack, it should be installed on the central wall of the bathroom, preferably 1.5 meters from the ground.

4. The ring distance between bath towel and ground is 0.9m-1.4m.

5. The height of the bar from the ground is 1.1m-1.2m.

Height of towel rack installation:

Under normal circumstances, the height of the wash basin from the ground is 0.8m, which is not only beautiful, but also convenient for daily use.

How to install the towel holder:

1, in the installation, to the surface of the water, oil stains, stains clean, the towel rack fixed on the suction cup.

2, the stainless steel pipe in the bracket.

3. Fix the adsorber on the position, squeeze out the air in the suction cup, and turn the button clockwise, if you want to remove it, just turn the button counterclockwise.

4. After completion, it is necessary to see whether it is safe and firm before placing the item on it.

Note on the installation of bath towel rack:

1. The towel rack should be installed above the bathtub, opposite the faucet, and 1600mm from the ground.

2, the towel rack should be fixed with plastic pipes and screws, so that it is not only simple, but also will not rust and easy to maintain.

3, the color of the towel rack and the faucet want to match, if the faucet is silver, the towel rack should also be silver, or no edge, so as to coordinate, not very messy feeling.

4, before installation, first hold one end of the hanging rod with your hand, wipe the hanging rod with a towel, if the quality is poor, you will feel small burrs or paint off. In addition, pay attention to the plating and coating quality of the shelf base to see if there are defects.

5, to check whether the screw on the base has the phenomenon of sliding teeth and rotten teeth, so as not to affect future use.

6, when installing the towel rack, be sure to determine the height according to your height, so as not to affect the future use.

Article summary: Where is the bath towel rack installed and how to install the relevant knowledge is introduced here, in the installation of the bath towel rack, in addition to pay attention to the location, we should pay attention to the height, installation method and installation precautions, so as to avoid subsequent trouble.